Important; Proper Use; Symbols And Technical Data - Parkside PESG 120 A1 Manual De Instrucciones Original

Important!

The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!

4. Proper use

The electric welder can be used to weld various
metals using the appropriate coated electrodes.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of
any kind caused as a result of this.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Symbols and technical data

EN 60974-6
European standard for arc welding sets and wel-
ding power supplies with limited on time (part 6).
Symbol for welding power supplies which are sui-
table for welding in environments with increased
electrical danger.
~ 50 Hz
Alternating current and rated frequency value
[Hz]
U
0
Rated idling voltage [V]
Anl_1549055.indb 46 Anl_1549055.indb 46
GB/MT
40A/19.6V - 80 A/21.2 V
Maximum welding current and the corresponding
standardized operating voltage [A/V]
Ø
Electrode diameter [mm]
I
2
2
Welding current [A]
t
w
w
Average load time [s]
t
r
r
Average reset time [s]
1 ~ 50 Hz
Line input; number of phases, the alternating cur-
rent symbol and the rated frequency value
Do not store or use the equipment in wet or damp
conditions or in the rain. Use the equipment only
indoors.
U
1
Line voltage [V]
I
1max
1max
Highest rated value of the line current [A]
I
1eff
1eff 1
Effective value of the highest line current [A]
IP 21S
Protection type
H
Insulation class
Electrode holder connection
Ground terminal connection
- 46 -
17.10.12 16:34 17.10.12 16:34