Menu - Gima OXY 110 Guía De Uso

49
Figure 4.2B Default Display
Screen---in horizontal
• Sound indicator
the indication sound by short pressing
key can turn off (or resume) the device sound (including pulse beep sound,
audible alert and key click), while the pulse symbol
measurement, over-limit event or probe off event can activate the alert indica-
tion sound. Refer to Section 6.2 for detailed alert indication sound.
• If the memory is full, the corresponding memory full icon appears on the screen,
means temperature memory is full,
memory is full,
icon means the current corresponding storing space is not full. If the memory
is full, the data storing will continue in such way the new record will overwrite
the oldest record, so that it's recommended to upload the stored data into the
computer in time.

4.3 Menu

On the default measuring screen, short time press
entering into main menu screen (as shown in Figure 4.3).
There are 9 functional icons in main menu screen, press Up/Down/Left/Right key
can move the cursor to make selection and press
to confirm the selection.
• User ID: Add new or edit the current User ID.
• User: Select patient type, "Adult" and "Neonate" for option.
Note: when the device is set to the neonate patient type, then the User icon
turns to grey
pink .
means the device is on mute status, the user can resume
means SpO trend record memory is full. No display of the
2
, and the patient type on upper left corner turns to
ENGLISH
key again. Short time press
still blinks. During the
means SpO spot-check record
2
Menu/Confirm key for
Menu/Confirm key again