Amann Girrbach masterbox Modo De Empleo página 35

EG – Declaration of conformity
We,
Hereby declare that the design, construction and commercial
execution of the machine designated below is in conformity with the
relevant safety and health requirements of the appropriate
EU directive.
Any modifications performed on the machine without our approval
shall invalidate this declaration.
Machine designation:
Machine Type:
Order No.:
Corresponding EU standards:
Applicable harmonized standards:
Koblach, 11. January 2004
35
Fa. Amann Girrbach GmbH
6842 Koblach | Austria
75177 Pforzheim | Germany
Masterbox
Plaster-/water dispensing unit
116160
89/392/EWG
73/23/EWG Low voltage directive
89/336/EWG EMV-directive
EN 292-1,
EN 292-2,
EN 61010-1,
EN 55014
Authorised representative:
Ing. Oliver Amann