Remington REM-80-OFR-O Manual De Instrucciones página 6

Long Screws (6)
19 mm Axle Nuts (2)
1. Slide axle through Wheel Frame and attach
wheels, washers and nuts (see Figure 6).
Figure 6
2. Place main structure on wheel frame and
fasten with long screws provided (see Figure 7).
Figure 7
3. Attach safety guard to front of heater with
screws provided (see Figure 8).
Figure 8
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
WHAT'S IN THE BOX
125-OFR-O
8 mm Nuts (6)
Short Screws (4)
Spacers (2)
Washers (2)
ASSEMBLY
125-OFR-O
Wheels (2)
Safety Guards
(Top, Front)
Axle (1)
4. Attach Radiant Visors to the top and bottom
rear of the Radiant Cone Assembly using
extra screws included.
Figure 9
Radiant Visor
Safety
Guard
Radiant
Cone
Assembly
5. Attach top safety guard using the two
outer-most extra screws on the top of the
radiant cone (see Figure 9).
Note: Save the box and packaging materials for
future storage.
6 Kerosene Radiant Heater User's Manual
Visors (2)
Wheel Frame
Top Safety Guard
Screws