Care And Maintenance; Environmental Protection - EDM Product 08722 Manual De Instrucciones

CARE AND MAINTENANCE

This machine requires no special mechanical maintenance such as
greasing the bearings. Do not try to open or disassemble your drill or
feeder to intervene yourself. Do not open and replace the battery
cells. Do not let the drill dead load. Always use the correct charger
recommended. Improper use may cause risk of electric shock, over-
heating or leakage of electrolyte. To protect the batteries from
damage, do not expose to temperatures above 40°C.
Never immerse the machine and do not use detergent, alcohol,
gasoline, etc.
In case of problems or for a deep cleaning, consult the manufactu-
rer, its service agent or a similarly qualified person to avoid a hazard.

ENVIRONMENTAL PROTECTION

This product is marked with the selective sorting symbol on waste
electrical and electronic equipment. This means that this product
should not be disposed of with household waste but must be
supported by a collection system in accordance with Directive
2012/19/UE. It will then be recycled or dismantled to minimize
impacts on the environment, electrical and electronic products are
potentially hazardous to the environment and human health due to
the presence of hazardous substances. Do not dispose of batteries.
Return exhausted batteries to your local collection or recycling
point.
Instruction manual Ref. 08722
ES
PT
EN
FR