Signs And Symbols; Transport, Handling And Storage - Enofrigo DOGE Serie Manual De Instrucciones

• To protect against INDIRECT contacts, all the metal parts are earthed by means of an appropriate lead. Via
the plug-socket connection, this lead must ensure electrical continuity between the machine and the general
earth system; the suitability and efficiency of the general system and the accessory equipment necessary for
cutting off the power supply in the event of a fault are the responsibility of the machine user.
• The equipment and all other electrical components are fitted inside closed compartments in order to prevent
any DIRECT contact with live parts. The electrical current danger signal is affixed to the electrical panel
protection.
Please note that the socket, interlocked by a switch, is to be installed about 130 cm from the floor and
positioned so that it is safe from shock or damage. Keep the lead away from the edges of the tray.
c)
Hygiene precautions
The elements or parts of the machine that come into contact with the food, i.e. those in the so-called FOOD
AREA, are all made of stainless steel.
d)
Noise precautions
The machine does not emit bothersome or harmful noise levels.

9. SIGNS AND SYMBOLS

The safety signs draw the operator's attention to possible dangers for the purposes of safety.
DANGER! Electrical power supply
Check the perfect conditions of all colours and words on the signs and symbols. As soon as they become
even slightly damaged, request the manufacturer or authorized dealer for a copy and replace them.
The symbols on the thermoregulator are described in the thermoregulator user's guide chapter.

10. TRANSPORT, HANDLING AND STORAGE

The machine is packed in a cardboard box bearing the symbols and indications for handling.
It is subsequently placed on a pallet and loaded on a container or wagon by means of an adequate forklift truck.
The machine must always be handled with the utmost care and caution.
Operators assigned to handling of the machine must be qualified and adequately trained.
For storage of the machine, use dry ventilated rooms and protect the machine with a tarpaulin.
The manufacturer accepts no liability for damages caused by operations that have been performed incorrectly.
10.1 Procedures for unloading the machine by means of a forklift truck
Step 1 unload the machine, still packed, from the lorry with the utmost caution
23 CT68900001_
Rev.00 07/13