Mounting - Leuze electronic ASM1 Manual De Instrucciones

5

Mounting

The safety monitor is mounted by clipping onto a standard 35 mm rail
acc. to EN 50022.
➢
To remove, firmly press the monitor against the upper rail guide
and lift out.
C
A
Fig. 5.0-1: Mounting the safety monitor
➢
To remove the encoded connection terminals, push back the
safety spring a and pull the terminal away towards the front.
➢
When mounting, the connection terminal must audibly lock into
place.
36
D
B
ASM
A, B, C, D: