Product Description; Analog Integration - Mettler Toledo InPro 6000 Guía De Configuración Rápida

en
22
a
Warning: Before dismantling the sensor or com-
mencing any maintenance work on it, ensure that the
equipment in which the sensor is installed is in a safe
condition (pressurize, no explosion risk, empty, rinse,
vent, etc.).
3

Product description

The sensors are delivered fully assembled, factory
tested and calibrated for correct function. A quali-
ty certificate and an inspection certificate 3.1 acc.
EN10204.3 / 1B is provided.
Drawings of the sensors see Appendix A
(InTap sensor not shown).
The sensors are installed by using a VP-Cable
(InPro 6860 i) or a 5 pin cable (InPro 6970 i /
InPro 6960 i / InTap sensor). Cables in different lengths
2 – 50 m are available from METTLER TOLEDO.
Notice: Cable assignment can be found in the
h
METTLER TOLEDO cable installation manual.
3.1

Analog integration

Integration without transmitter (InPro 6860 i nA /
InPro 6860 i mA):
For analog integration two versions of the InPro 6860 i
exist.
– The simulated nA signal is used for legacy biocon-
troller integration
– The 4 / 20 mA-output incl. HART signal is used to
integrate the sensor directly into a process logistic
controller (PLC).
RS485 cable for
InPro 6870 i / InPro 6960 i / InPro 6870 i
Color
brown 24 VDC+ 1
black 24 VDC– 2
gray
yellow shield
blue
white
VP8 cable InPro 6860 i / nA
Color
gray
blue
pink
brown RS485–
green /
yellow shield
InPro 6000 / InTap Optical O
© 06 / 2019 Mettler-Toledo GmbH.
M400
Function TB4
shield 6
6
RS485– 7
RS485+ 8
M400
Function TB4
24 VDC+ 1
24 VDC– 2
RS485+ 8
7
4
2
InPro 6000 / InTap Optical O
M800
1/2 channel
TB2
9
10
12
15
13
14
M800
1/2 channel
TB2
9
10
14
13
12
Sensors
2
M800 M400
4 channel 2w/FF/PA
TB2 or TB2
TB4
9 n.c
10 n.c.
12 M
15 n.c.
13 N
14 O
M800 M400
4 channel 2w/FF/PA
TB2 or TB2
TB4
9 n.c
10 n.c.
14 O
13 N
12 M
30 313 394 B
Printed in Switzerland
Sensors