Aqua Medic spectrus 60 Manual De Instrucciones página 15

Pict. 2: Colour illustration spectrus 60
3. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
Included in shipment:
spectrus incl. power pack
•
steel wire suspension
•
Holder
•
4.
Safety advices
The lighting system cannot be used as aquarium cover. It has to be mounted only above the
•
aquarium. The minimum distance between light and water surface should be selected so that no
water or salt splashes can reach the light.
The housing may become hot during operation. Be cautious when touching it!
•
For cleaning, disconnect the lighting system from the mains and let it cool down. Afterwards,
•
take the light down.
When cleaning, take care that no humidity enters the interior of the lighting system!
•
Pay attention to a sufficient thermal exchange. Do not mount the system in enclosures or
•
behind panels. Missing aeration may result in overheating and damage the electric components.
Do not try to repair the lighting system (LEDs, electronic parts). Please send it in for checking,
•
preferably with a list of defects. Even broken LEDs can only be changed by the manufacturer.
When working on the light, always pull all power plugs.
•
5. Installation
The light is either mounted with the included steel wire suspension on the ceiling or with the
included holders at the aquarium.
The suspension system comprises 2 pcs. of each of the following:
1. Ceiling plate with screws and plugs, 2 metre stainless steel cable with stopper
2. Light fixing (cable with end bushes)
15