Transportation By Means Of Crane - ABB MNS R Manual De Instalación

The transportation on manual lift
truck is dangerous, the apparatus
can overturn. For this reason, the
distance between the crossbeams
or pallets and the bottom must not
exceed 3 mm (see Figure).
3.3.2

Transportation by Means of Crane

• For the transportation by means of a crane, the compartments and the related sending units must be
equipped with lifting angles.
• It is not allowed to fix the lifting devices to the frame sections.
• The angle between the lifting cable and the crane hook must not exceed 120° (see Figure).
• The lifting angles can be removed after the apparatus installation has been performed.
• The fastening holes for the lifting angles are to be plugged with plugs GMN 775 502 P18 caps.
11
1TTS900001M0902