Auxiliary Mode; Technical Support - aqprox appRAVE Guía De Usuario

card APPRAVE you directly to the USB or SD mode. You can press the Mode
button and select BT to switch to Bluetooth mode again.

Auxiliary mode:

1. Turn on APPRAVE
2. Press the Mode button until the display shows the word "AUX".
3. You can connect devices with 3.5mm output jack to the LINE IN input or
output devices with RCA AUX IN.
4. Play your favorite music from your player.
Note:
While using the AUX function, all playback functions like next / previous
track can be controlled only through its source playback device
Microphone mode:
1. Turn on APPRAVE
2. Connect the microphone to the MIC INPUT and change the switch to ON.
3. Press the Mode button until the display shows the word "AUX or BT".
(Only Assistant or Bluetooth mode can be played)
3. You can connect devices with 3.5mm output jack to the LINE IN input or
output devices with RCA AUX IN.
4. Play your favorite music from the selected mode. You can play at once
both audio microphone and audio on your player as if it were a Karaoke.
5. You can raise and lower the volume of the microphone from the
controller front panel MIC VOLUME.
6. You can increase or decrease the microphone echo from the controller
front panel ECHO.

Technical Support

For more information on installing and configuring this product please
contact our web support section on www.approx.es or send an email to the
following address: soporte@approx.es