Publicidad
CMS440
EXTENSION COLUMN INSTALLATION
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer's responsibility to make sure the combined weight of
all components attached to the CMS440 up to (and including)
the display/projector, does not exceed 50 lbs (22 kg).
1.
Install the extension column (accessory not included) to the
extension column support. See installation instructions
included with the accessory.
NOTE:
If installation instructions are not available, contact
Chief Manufacturing for assistance.
2.
Using hex key (L), secure extension column by one of the
following methods (See Figure 10):
•
Install screw (H) into extension column support,
tightening firmly against column.
•
OPTIONAL: Install security screw (J) through locking
collar (K) into extension column support, tightening
firmly against column.
NOTE:
Locking collar (K) is designed to spin, even when screw
(J) is tight.
H
K
J
Figure 10
10
(H)
2
(J, K)
3.
Install finishing ring (B) on extension column below ceiling
tile (See Figure 11). If necessary, bend four tabs inward to
secure ring to column.
Figure 11
4.
Reinstall remaining ceiling tiles as required.
Installation Instructions
(B)
3
Publicidad
