Basics Of Operation; Remote Control; Status Leds - DURAVIT SensoWash Slim Manual De Instrucciones

4. Basics of operation

4.1 Remote control

SensoWash
altered via the remote control as well.
Press the respective button on the remote control to switch on a
function. The button lights up white briefl y.
EN
To switch off a shower function, press "Stop"
control.
If the remote control is not available or the batteries are empty,
then basic functions can also be switched on or off from the side
control buttons.
> Press the lock of the "Battery Compartment"
> Insert two lithium batteries (CR2032) with + facing upwards.
> Close the "Battery Compartment"

4.2 Status LEDs

Red illuminated: SensoWash
Green illumina-
ted:
Green fl ashing:
Red fl ashing:
10
is operated via the remote control. Settings are
®
tions cannot be used.
SensoWash
can be used.
SensoWash
only "Power"
Malfunction. Disconnect main power supply
and proceed with chapter 9.
.
8
is in the "Standby mode", all func-
®
is in the "On mode", all functions
®
is in the "Initialization" process,
®
on the seat unit can work.
A
on the remote
7
to open it.
8