Beurer GS 39 Instrucciones Para El Uso página 13

Display De
0.0
Now step onto the scale. Stand still on the scale with your weight distributed
evenly between both legs. The scale immediately begins to measure your
weight. After flashing twice the final measurement result appears on the dis-
play. (Fig. 3)
There is also an acoustic output. The scale switches off 10 seconds after you
step down from it. The measuring result remains visible during this time.
If the scale detects an error during weighing,
display (Fig. 4+5).
Display De
Fehler
If a weight of more than 150 kg is placed on the scale, "OVEr" is displayed
(Fig. 6).
Display
Make sure that you always switch on the scale first and wait for the display
stepping on.
4.3 Weighing with storage function
The scale has 4 storage locations (buttons 1-4).
Switch on the scale as described in "4.2. Measuring weight"and wait until the display shows "0.0"
(Fig. 2).
Now press the desired storage location (1, 2, 3 or 4).
For example, press the "1" button that appears in the upper left-hand corner of the display "User 1".
Display De
User 1
Now the scale is ready to measure your weight, as described in 4.2.
The measurement is automatically saved in the respective user memory. If necessary, a previous
measurement is exceeded.
FR
Das Gerät L'appareil est
ist betriebs- prêt à
bereit fonctionner
FR GB
Erreur Error Error
De FR
Überlastung Surcharge Overload
FR
Speicher- Emplacement
platz 1 de mèmoire 1
GB
The device is
ready for use
---- or Err appears in the
" " " "
eS RuS
Неисправность
GB eS
Sobrecarga
GB eS
Memory Espacio de
space 1 memoria 1
13
eS RuS
El aparato Прибор
está готов к
preparado работе
para
el servicio.
Fig. 3
Fig. 4
Fig . 5
Fig. 6
RuS
Перегрузка
0.0
(Fig. 2) before
" "
RuS
Пользоватейски
елемент позиция 1