Binks 183G-500 Manual De Instrucciones página 11

VS-534
FLUID STRAINER
Primary fluid strainer that attaches
between fluid outlet valve and fluid hose
to strain material. Components made of
stainless steel with a nylon filter. Comes
standard with 100-mesh screen. For more
information see SBBI-7-072.
HFRL-508, HFRL-509
CLEAN AIR™ CONTROL UNITS
These units are designed to remove
dirt, pipe scale and most liquid aerosol.
Includes an automatic drain which
expels liquids which accumulate in
the filter bowl.
29-3100 SCRUBS
®
HAND CLEANER TOWELS
Scrubs are a pre-moistened hand cleaner
®
towel for painters. No water is needed.
83-2924 FLUID Y-STRAINER
Attaches on fluid outlet of tank.
Includes 100-mesh filter screen.
(Additional filter screens in other
mesh sizes available.)
ACCESSORIES
DISPOSABLE TANK LINERS
Molded polyethylene tank liners reduce solvent
waste and tank cleanup time. The liner is made
of tough, durable, leakproof poly-ethylene and
can be used with all compatible materials.
PTL-408-K20 Kit of 20 tank liners (9.8 gal.)
PTL-412-K8 Kit of 8 tank liners (11.8 gal.)
PTL-415-K10 Kit of 10 liners (19.8 gal.)
PROSPECTOR ™ PRESSURE TANK STRAINERS
FOR 5, 10, AND 15 GALLON TANKS
Prospector™ strainers are an economical way to remove foreign
material from paint, stain, lacquer and coatings.
Inner Diameter .............. 11.75" (298.45mm)
Outer Diameter ........... 15.375" (390.52mm)
Height/Depth ..................... 3.75" (95.25mm)
Case Qty ..................................................... 20
PTS-5Gal-K20-200 ........................200 micron
(approx. 65 wire mesh)
PTS-5Gal-K20-400 ........................400 micron
(approx. 37 wire mesh)
PTS-5Gal-K20-600 ........................600 micron
(approx. 28 wire mesh)
11