Binks 183G-500 Manual De Instrucciones página 4

5/10/15-GALLON GALVANIZED TANK ASSEMBLIES – SPECIFICATIONS & OPTIONS
Maximum Working Pressure
Tank Shell
Tank Lid
Fluid Tube
Fluid Outlet (Elbow)
Fluid Valve, Outlet
Agitator Paddle/Propeller
Agitator Shaft
Agitator Shaft Seal
Air Manifold
Plug (Air Manifold Coupling)
Bottom Outlet (Optional Kit)
TYPE
No Regulation (Air inlet pressure gauge only)
Standard Single Regulation
Standard Double Regulation
Extra Sensitive Regulation
Extra Sensitive Regulation with
Standard Gun Regulation
TYPE
No Agitation
Gear-reduced Drive Agitation
4
SPECIFICATIONS
GALVANIZED TANKS
110 psi
SA-414 Steel, Galvanized (Zinc)
SA-414 Steel, Galvanized (Zinc)
3/8 in. Steel Pipe, Galvanized
Steel, Zinc Plate
Brass, Nickel Plate 3/8-18 NPS(M)
Nylon, Glass Filled
Steel, Zinc Plate
Engineered Teflon, Stainless Steel
Steel, Zinc Plate
Steel, Zinc Plate
304 Stainless Steel 3/4-14 NPS(M)
TANK CAPACITIES
Nominal Capacity Actual Capacity
5 US Gallons 9.8 US Gallons
10 US Gallons 11.8 US Gallons
15 US Gallons 19.8 US Gallons
AIR CONTROL OPTIONS
APPLICATION
Holding tanks, Transfer tanks, Used where precision fluid pressure control is
not required.
Provides standard fluid pressure control only. For use where precision control
of both fluid and air pressures is not required. Also Used where atomization
air can be taken from filter/regulator air lines.
Precision control for use with materials that are best applied at low, closely
controlled, fluid and atomization air pressures. Used with portable air
compressors or with air lines when no other means of air pressure regulation
is available.
Provides extremely accurate, low pressure, fluid pressure control
Provides extremely accurate, low pressure, fluid pressure control plus precision
control of spray gun atomizing air.
AGITATION OPTIONS
APPLICATION
Materials that require minimal or no mixing and/or readily hold any solids in
suspension.
Heavy-duty agitator for medium to high viscosity materials that require mixing
and/or solids suspension.
PTFE