Publicidad
Idiomas disponibles
Idiomas disponibles
Install Side Shelf Control Panel
Attach the Side Shelf Control Panel to Side Shelf Frame using 4 Phillips Head Bolts(M4x8mm).
Phillips Head Bolt
M4x8mm
Qty: 4
Install
Side Shelf Frame
to Firebox
Assembly
Unscrew
the 2 Phillips Head Bolts 1/4 inch out from the upper left and right corner holes in the left
side of the Firebox as shown (Inset 1).
Slide the upper holes of the Side Shelf Frame over the heads of the 2 Phillips Head Bolts and drop
down.
Use 2 Phillips Head Bolts (M6x13mm)
to attach the lower holes in the Side Shelf Frame to the Firebox
Assembly as shown (Inset 2).
Do not tighten bolts at this time.
Use 2 Phillips Head Bolts (M4x8mm)
to attach the Side Shelf Control Panel to the Firebox Assembly
(Inset 3).
Tighten the 2 previously
loosened and all other Phillips Head Bolts used in this step.
Phillips Head Bolt
M4x8mm
Qty: 2
Phillips Head Bolt
M6x13mm
Qty: 2
Inset 1
Inset 3
2O
Inset 2
Publicidad
