Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Re-install the back panel and tighten all eight (8) panel
mounting screws to 80 in.-lbs.
Loosen Bolts to
Set Floodlight
Angle
Figurt 2.
3.
To make final vertical adjustment, loosen the pivot
bolts on the floodlight yoke to position floodlight at the
desired angle (limited to 60 degrees forward and 45
degrees back).
4.
Rotate the floodlight housing to the desired position.
5.
Tighten the two pivot bolts to 45 ft.-lbs.
6.
Turn power on.
Dimensions
Installation Instructions – FFL Series Industrial LED Floodlights
(532.9)
21.0
(405.9)
16.0
(552.5)
21.75
(14)
(120.7)
ø.55
4.75
InsoallaoiNn InsorucoiNns – FFL Strits Indusorial LED FlNNdlighos
IF 1629 FS
ADC140282
MAINTENANCE
Perform visual, electrical, and mechanical inspections on
●
●
a regular basis. The environment and frequency of use
should determine this. However, it is recommended that
checks be made at least once a year. We recommend an
Electrical Preventive Maintenance Program as described
in the National Fire Protection Association Bulletin NFPA
70B: Recommended Practice for Electrical Equipment
Maintenance (www.nfpa.org).
The lens should be cleaned periodically to ensure
●
●
continued lighting performance. To clean, wipe the lens
with a clean damp cloth. If this is not sufficient, use a
mild soap or a liquid cleaner such as Collinite NCF or
Duco #7 . Do not use an abrasive, strong alkaline, or acid
cleaner. Damage may result.
Visually check for undue heating evidenced by
●
●
discoloration of wires or other components, damaged
parts, or leakage evidenced by water or corrosion in the
interior. Replace all worn, damaged, or malfunctioning
components and clean gasket seals before putting the
luminaire back into service.
Electrically check to make sure that all connections are
●
●
clean and tight.
Mechanically check that all parts are properly assembled.
●
●
Replacement Parts
Cooper Lighting Solutions LED Floodlights are designed to
provide years of reliable lighting performance. However,
should the need for replacement parts arise, they are
available through your authorized Cooper Lighting
Solutions distributor. Assistance may also be obtained
through your local Cooper Lighting Solutions
representative.
(167 .1)
6.6
www.cooperlighting.com
3
Publicidad
Tabla de contenido
