Design And Function; Complete Overview - H.Koenig FRY700 Manual De Utilización

• Before connecting the device, compare the connection data (voltage and frequency) on the
rating plate with those of your electrical network. This data must agree in order that no damages
occur in the device. If in doubt, ask your qualified electrician.
• The electrical outlet must be protected by a 16A safety cut-out switch.
Do not use an extension lead. If you accept liability for doing so, only use an extension lead which
is in good condition and is suited to the power of the appliance.
• The use of multiple plugs or gangs is prohibited because of the danger of fire that is involved
with this.
• Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
• The electrical safety of the device is only guaranteed if the device is connected to a properly
installed protective conductor system. Operations using an electrical outlet without a protective
conductor are prohibited. If in doubt, have the house installation checked over by a qualified
electrician. The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

4 Design and Function

This chapter provides you with important safety notices on the design and function of the device.

4.1 Complete overview

A. Frying basket
B. Basket release button
C. Frying basket handle
D. Frying pot
E. Air outlet and oil smoke filter
F. Control panel and LCD display
G Housing back
H. Main power cord
1. Menu
2. Time and Temperature set
3. Plus timer or temperature
4. Min time or temperature
5. Display