Maintenance; Available Dies - Greenlee Shear 30T Manual De Instrucciones

Maintenance

Lock out power to the Cutting Unit before performing any maintenance.
Change the hydraulic oil annually or after 10,000 cycles. Use ASTM 215 hydraulic fluid (or equal).
At least monthly, clean the inner track portions of the Cassette Frame and Die Retaining Rails. Apply a moly based, spray
lubricant to the working surfaces. A dry film lubricant such as Molykote 557 is recommended.
The material cutting dies are wear parts and will fail over time. Order additional dies through Greenlee distributors.
The unit experiences a shock during each cutting cycle which can loosen bolt connections over time. Periodically check all
fasteners on the Cutting Unit and retighten where needed.

Available Dies

KEY CAT NO.
1 1316SSTRT
2 78SSTRT
3 158STRDSTRT
4 158SSTRT
5 1316DSTRT
6 78DSTRT
7 158DSTRT
8 4STRT21
9 4STRT22
10 1458TROD
11 GSDR15
12 THDR7515
13 3000SSRB
14 3000SSRC
15 14ANG-KIT
16 26RBR-KIT
*Support required for angle iron and rebar dies
**See replacement parts for individual angle iron and rebar dies (page 21)
Greenlee Tools, Inc.
DESCRIPTION
13/16 X 1-5/8 Single box profile
7/8" x 1-5/8 Single box profile
1-5/8 x 1-5/8 Single box profile
13/16 x 1-5/8 & 1-5/8 x 1-5/8 Single
box profiles
13/16 x 1-5/8 Double box
back-to-back profile
7/8 x 1-5/8 Double box
back-to-back profiles
1-5/8 X 1-5/8 Double box
back-to-back profiles
1-1/16 x 2-1/8 Single box 4D profiles
2-1/8 x 2-1/8 Single box 4D profiles
1/4-20, 3/8-16, 1/2-13 & 5/8-11
Threaded Rod
32 x 15mm G-Type DIN Rail profiles
35 x 7.5mm & 35 x 15mm DIN Rail
Combo profiles
3000 Series Steel Raceway Base profile
3000 Series Steel Raceway Cover profile
Angle Iron dies with Rear Support
Rebar dies with Rear Support
Shear 30T Shearing Station
COMPATIBILITY
B-Line B52, B54, & B56
Unistrut P4520, P4100, & P4000
Powerstrut PS 520 & PS 500
Superstrut B-1200 & B-1400
Unistrut P3300
B-Line B22, B24, & B26
Unistrut P1000, P1100, & P2000
Powerstrut PS 200 & PS 210
Superstrut A-1200 & A-1400
B-Line B22, B24, B26 & B52, B54, B56
Unistrut P1000, P1100, P2000 & P4520, P4100, P4000
Powerstrut PS 200, PS 210 & PS 520, PS 500
Superstrut A-1200, A-1400 & B-1200, B-1400
B-Line B52A, B54A, B56A
Unistrut P4001, P4101, P4521
Powerstrut PS 500 2T3, PS 520 2T3, PS 560 2T3
Superstrut B-1202 & B-1402
Unistrut P3301
B-Line B22A, B24A, B26A
Unistrut P1001, P1101, P2001
Powerstrut PS 200 2T3, PS 210 2T3
Superstrut A-1202 & B-1202
B-Line 4D21
B-Line 4D22
All mild steel rod
TS-32 (G)
TS-35 (7.5mm), TS-35 (15mm)
Legrand G3000B, V3000B
Legrand G3000CE, V3000B
Mild steel in sizes up to 2"x 2" and 1/4" maximum thickness
Grade 60 Rebar in sizes up to #6 (3/4")
11
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070