General Information; Heros-Xtreme Specifications - Rosenbauer HEROS-xtreme Información Para El Usuario

Rosenbauer - User Guide HEROS-xtreme
WARNING: The fireman's helmet can only offer maximum protection if
it has been properly adjusted and provides a perfect fit on the head. The
helmet may only be worn in its entirety. Removable parts may not be
used singly.
2. Specifications

2.1 General information

Manufacturer:
Rosenbauer International AG
Paschinger Straße 90
4060 Leonding, Austria
Tel.: +43 732 6794-0
rbi@rosenbauer.com
www.rosenbauer.com
These instructions for use are valid for the HEROS-xtreme helmet in its differing
versions, ID-No: 1568XX
The HEROS-xtreme fire fighting helmet was designed and tested in accordance
with the stipulations of the EN 443:2008 European standard.

2.2 HEROS-xtreme specifications

Inspected acc. to standard: EN 443:2008
0158
C
Helmet type B / 3b
Hat sizes: 51-65 cm (adjustable)
E2 (optional requirement 4.12.2. –
insulation of wet helmet – fulfilled)
C
E3 (optional requirement 4.12.3. – surface insulation – fulfilled)
C (optional requirement 4.13. –
contact with chemicals – fulfilled)
*** (optional requirement – minus 30°C – fulfilled)
Tested as per standard: EN 16471:2014 C 0299
"Firefighting helmets – Helmets for wildland fire fighting"
Tested as per standard: EN 16473:2014 C 0299
"Firefighting helmet – Helmets for technical rescue"
Tested as per standard: ISO16073:2011 C 0158
Tested as per standard: AS/NZS 1801:1997
26 26