NSK Endo-Mate AT Manual De Operación página 15

The Motor Handpiece does
not rotate. (" " and
the speed are displayed
alternately.)
When the power is turned
On, the alarm sounds and
the Motor Handpiece does
not rotate.
13
Specifications
<Control Unit, Motor Handpiece>
Model
Rated input
Rated output
Dimensions (Control Unit)
Dimensions (Motor Handpiece)
Weight
<AC Adaptor>
Model
Rated input
Cord length
Dimensions
Weight
<Contra Angle Head>
Model
Max. Rotation Speed (Motor)
Max. Rotation Speed (Handpiece)
Gear Ratio
File Type
Chucking Length
File Motion
Weight
Use Environment
Transportation and Store
Environment
* No Condensation
* Using in conditions outside the limits above may cause malfunction.
Contra Angle Head is clogged up.
Short circuit inside the Motor Handpiece or the
cord of Motor Handpiece.
The ON/OFF button is pressed when the power
is turned ON.
Short circuit inside the ON/OFF button.
W268 x D230 x H03mm
342g (including the Motor Handpiece)
NE69
AC00V 50/60Hz
Plug side .8m/Unit side .8m
98g
ISO 797- Type ø2.35mm Engine File
Temperature
0 - 40°C
-0 - 50°C
NE305
DC20V 0.5A
DC7V 0.4A
ø20×L08.5mm
NE69-02
AC20V 60Hz
W70 x D0 x H58mm
933g
iFX75
3,000min
-
83min
-
6: Reduction
9.4mm
360°Rotation
4g
Humidity
0 – 85%
0 – 85%
4
Clean or replace the Contra
Angle Head.
Contact your NSK Dealer.
Check the ON/OFF button.
Contact your NSK Dealer.
NE69-03
AC230V 50/60Hz
Plug side 2m/
Unit side .8m
974g
Atmospheric Pressure
-
500 - 060hPa