Fuse Replacement; Mounting Diagram - Chauvet DJ Shocker Panel 180 Guía De Referencia Rápida

Shocker™ Panel 180 USB QRG EN

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact
same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Mounting Before mounting this product, read the Safety Notes. Make sure the mounting
clamps (such as CLP-15N clamps from Chauvet) are capable of supporting the
weight of the product. For the Chauvet line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html.
Mounting Clamp
Hanging/Mounting
Bracket
(also used as floor
supports)

Mounting Diagram

Safety Cable
Bracket
Adjustment
Knobs
4