König Electronic SEC-TRANS30 Manual Del Usuario página 7

User instructions
1. LCD monitor
2. Mute button
3. AV button
4. CH button
5. IR control sensor
1. Press the Power button (9) to switch on the monitor.
2. Press the CH button (4) to set the correct channel.
3. Press the Menu button (7) to navigate to the sub-menus.
The following sub-menus are displayed:
• Display settings: "Bright", "Contrast", "Colour" or "Hue"
Adjust the display settings with the + (8) or – (6) button.
• "AV switched set"
Select the cameras, which will be shown subsequently in automatic mode. Press the + or –
button to switch between channels and the Menu button to select or deselect a channel.
"√" indicates that this channel has been selected.
"ο" indicates that this channel has not been selected.
• "Time switched"
Increase or decrease the time interval for automatic mode with the + or – button.
4. Set the Auto/Manual switch (10) to "Auto" to switch between the selected channels automatically.
When pressing the AV button, manual switching mode shows all camera images,
including cameras, set to "ο".
5. Press the Mute button (2) to switch the sound off or on.
For this feature to work, the microphone on the camera needs to be switched on.
6. - button
7. Menu button
8. + button
9. Power button
10. Auto/Manual switch
7