Series 912-Tp; Safety Instructions - Alcad 912-TP Serie Manual De Instrucciones

SERIES 912 - TP
Modular receiver equipment of digital TV via satellite, or QPSK-PAL
transmodulators. The equipment converts DVB-S digital TV programs into
terrestrial band, analogue TV channels.
1.

SAFETY INSTRUCTIONS

Make all IF, RF and supply connections before connecting the units to the
electric mains.
To meet the safety norms, the
electrical installation must be
protected by a differential
circuit-breaker.
Fig. 1 - Device ground
Do not remove the unit covers
while connected to the mains.
All repairs must be performed
by authorised technical service
staff. Internal manipulation of
the units cancels all warranties.
Fig. 2 - Do not manipulate
while connected
+ 45 °C
-- 10 °C
Fig. 3 - Range of temperatures
Serie 912 - TP
connection
Make sure that the unit is properly ventilated. For
installation in a chest, use a CP-710 chest (cod. 9050041)
together with the VE-500 ventilator (cod. 9050043). A unit
working outside its temperature range (-10 to +45°C) can
be damaged beyond repair. Do not block or cover the
supply or cabinet ventilation slots.
2
³4 mm
230 V
ENG - 25