Singer 288 Manual De Uso página 13

1
2. Getting Ready
toSew
Choosing and
Changing Accessories
CAUTION* Di5conneet the power line plug
from the
socker
outlet when changing
needles,
feet, or needle ptates, or when leaving the
machine unattended. This elirninates the
possibilltv of startinq the machine by
accidentally pre55ing the speed controller.
Changing Pr••••r Feet
• Baise needle to hiqhest position by turning
the hand wheel toward vou.
• Ra ise presser foot.
lo Press toe of presser foot upvvard as far as
it will go until it snaps free.
2 0 Centre the new presser foot under the
shank A. Lower the presser foot lifter
50
that the shank fits over the presser foot
pino
30 Preu presser foot screw down firmly until
foot snaps into place.
3
- - - - - - - - - - - - 11