Stitch Length Selector - Singer 288 Manual De Uso

~
~
....
_~
,
c.
, ,
..
~
3.Stnalght
Stltchlng
Stitch Wldth Selector
Before Vou move the selectors to set your
machine for ~traight stitching, turn the hand
wheel toward Vou until needle is above the
needle plate.
Straight stitching can be llFformed with pattern
seleetor in any position; stitch width lever must
be set at only.
Meedle Poaitlon Selector
Needle Position Seleetor positions tne needle in
18ft (
!.
I.
center ( I
I,
'o r right (
.!.
I
needle
-
positions.
Stitch Length Selector
The stitch length indicator is numbered O to 4.
The lower numbers are shorter stitches. Shorter
stitches are best for lightweight fabrics; longer
ones for heavy fabrics. To adjust the langth of
your stitches, turn the dial so that desired stitch
length is positioned under (-.) symbo I.
• To shorten stitch length, turn dial toward a
lower number.
• To lengthen stitch length, turn dial toward a
higher number.
For reverse stitching, push in on push button
located in canter of dial, hold in until reverse
stitching is co mpleted , then release push
button. Push button can be pushed in while
machine is sewing.
- - - - - - - - - - - - 31