NSK Ti-Max Z Serie Manual De Instrucciones página 8

6. Insertion & Removal of the Bur
6-1 To Insert the Bur (Fig. 3)
1) Insert the bur into the chuck.
2) Depress the Push Button to open the chuck (
3) Fully insert the bur into the chuck until it stops (
4) Ensure that the bur is secure by gently pulling and pushing the bur WITHOUT depressing the Push Button.
6-2 To Remove the Bur (Fig. 4)
Depress the Push Button to open the chuck (
).
) then release the Push Button.
) and remove the bur ( ).
Push Button
2
1
Fig. 3
Push Button
2
1
Fig. 4
7