Newa Wave 2 Serie Instrucciones Y Garantía página 6

on the opposite side of the impeller (Fig. 17). Ensure that the ceramic part of the bush is facing the rotor.
Replace the complete rotor into the body pump (Fig.18-19), Replace the impeller chamber until you hear
the locking click, and rotate it until you hear a second click (Fig. 20). Insert the front bush in its originary
position in its seat on the impeller chamber (Fig. 21).
The motor of the NWA 1900 Adj-3200-5900-7500 and 10700 is self-protected against uncharacteristic
overheating caused by misuse, running-dry or jammed rotor. The NWA 13300 is provided with a self-
resetting thermal protector. If the pump stopped working, please investigate if the thermal cut-off has
been activated by first disconnecting the appliance from the electrical supply for approximately 1 hour,
then remedy the cause that made the appliance stop, and reconnect to the socket again.
WARRANTY: This product is guaranteed, in compliance to European directive 1999/44. as fee from faults
both in materials and workmanship for a period of 24 months from date of purchase.The manufacturer's
guarantee is now extended for a further 12 months, giving a total guarantee period of 36 months. If
the product fails to operate correctly within the first 36 months of the date of purchase, return it to
the retailer where it was purchased. The product shall be replaced free of charge.During the period of
warranty the product shall be replaced if: 1) The product is returned carefully packaged and has not
been damaged intransport. 2) Proof of purchase is supplied along with a detailed explanation of reasons
for the claim.The warranty is subject to the following restrictions and conditions: 1) The warranty
does not cover accidental damage or breakage. 2) Replacement of the product in no way represents
admission of responsibility. 3) The warranty is not valid in the case of improper use, and does not cover
damage caused by tempering or negligence on the part of the purchaser. 4) The warranty is not valid for
components subject to wear and tear (see * "SPARE PARTS" ).
2012/19/EU • EN50419 Correct Disposal of This Product
(Waste Electrical & Electronic Equipment).
(Applicable in the European Union and other European countries with separate collection
systems). This marking shown on the produci or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources. • Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take this item for
environmentally safe recycling. Check with the distributor (depending on its activities) if they can
collect WEEE even without the condition of purchasing a new appliance. • Business users should
contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
3