Memory Storage; Memory Storage Locations; Storing Numbers Into Memory; Dialing From Memory - Clarity 420 Guía De Usuario

Memory Storage Locations

The C420 has ten (10) indirect or two touch
memory locations on the telephone (0-9) that
can be programmed to dial frequently called
numbers of up to 16 digits.
One (1) Emergency Storage button is located
on the handset. These storage buttons can be
programmed with numbers of up to 16 digits.

Storing Numbers into Memory:

1. Press the MEM button.
2. Dial the number you wish to store.
3. Press the MEM button again.
4. Press either the emergency button or
the number on the key pad that you
wish to store the number to.
5. A long beep will indicate the
programming process is complete.

Dialing from Memory:

1. Press the TALK button.
2. Press the MEM button.
3. Press the number on the key pad
where the desired number has
been stored.
4. The call will automatically dial.

Memory Storage

To Dial From Emergency Storage Location:
Editing Numbers Stored in Memory:
Replace a stored number by programming
a new number in its place.

Deleting Numbers from Memory:

NOTE: During the memory storage process
the TALK button will flash GREEN.
1. Press the TALK button.
2. Press the desired emergency button.
3. The call will automatically dial.
1. Press and hold the MEM button
for (3) three seconds .
2. Enter the location number (0-9) or
press the emergency button and
review the number.
3. Press the DEL button to erase the
memory. ERASE MEMO and the
location number will be displayed.
4. Press DEL again to confirm.
5. A long beep will indicate the
process is complete.
E
N
G
L
I
S
H
17