Safety Measures - Beninca BULL 5M Manual De Instrucciones Para El Usuario

• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the failure but contact the specialised personnel.
In the event of power failure or malfunction, to manually operate the gate proceed as follows:
• After inserting the customized key C, turn it anti-clockwise and pull the lever L.
• The geared motor is unlocked and the gate can be moved by hand.
• To return to the normal operating mode, close the lever L again and manually activate the gate until it is geared.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These operations
must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other components
of the automation system work properly. Wear and tear of some components could cause dangers.
As indicated by the symbol shown, it is forbidden to dispose this product as normal urban waste as some
parts might be harmful for environment and human health, if they are disposed of incorrectly. Therefore,
the device should be disposed in special collection platforms or given back to the reseller if a new and
similar device is purchased. An incorrect disposal of the device will result in fines applied to the user, as
provided for by regulations in force.
All Benincá products are covered by insurance policy for any possible damages to objects and persons caused by con-
struction faults under condition that the entire system be marked CE and only Benincá parts be used.
20
USER'S HANDBOOK

SAFETY MEASURES

MANUAL AND EMERGENCY MANOEUVRE
MAINTENANCE
WASTE DISPOSAL
WARNING
C
BULL
L