Power Supply; Error Code - Dentsply Sirona digit Power Manual De Uso

3. Description of Display Graphics
On/Off Power Button, Timer Mode selection button
FAST
Fast Set Timer Mode
SET
REG.
Regular Set Timer Mode
SET
WORK
User Set Timer Mode, Work Time adjustment screen
TIME
SET
User Set Timer Mode, Set Time adjustment screen
TIME
Battery level status icon
►
Icon reminds user to use the ► button to increase User Set times and the ►► button to decrease User Set times
►►
Bluetooth logo, indicates pairing status with optional wireless foot control
SHUT
Device is powering off
DOWN

ERROR CODE 1:

Unit is in overheated state
TEMPERATURE
ERROR CODE 2:
Unit drive train is in error state
DRIVE TRAIN
ERROR CODE 3:
Unit power supply is in error state

POWER SUPPLY

ERROR CODE 4:
Unit self-diagnostic check is in error state
SELF TEST
4. Powering the Handpiece On/Off
• To power on, press and hold the power/mode selector button for approximately 2 seconds.
• Handpiece will confirm proper function with slight advance and retraction of plungers.
2''
• Refer to the table for handpiece display of battery charge level.
HANDPIECE DISPLAY BATTERY STATES
Indicator Light
• To power off, press and hold On/Off/Mode selector button.
Percent of icon
100 %
75 %
50 %
25 %
Degree of Charge
80-100%
60-79%
40-59%
20-39%
7