General Safety Advice - SICK M4000 Manual Del Usuario

Operating
Instructions
Device Column
with Heater
a
WARNING
8008738/QG60/2006-10-20 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
Safety
2.3

General Safety Advice

Safety advice
The instructions set out in this document must be followed in order
to ensure the correct use of the device column and the heater:
Compliance with these Operating Instructions.

Installation, electrical connections, commissioning, repairs and

maintenance may only be carried out by qualified technical per-
sonnel who are familiar with the relevant safety regulations.
The heater operates at 230 V AC. Before removing the power

plug always disconnect the column and the overall system from
the power. Operate the heating via a 30 mA FI circuit breaker.
The operating and maintenance personnel working on the

photoelectric safety switch installed in the device column must
be instructed by qualified personnel prior to starting work. The
instruction is the responsibility of the machine operating com-
pany.
Before operating the multiple light beam safety device refer to

the relevant Operating Instructions.
Integrate the columns into the lightning protection system for

the overall plant.
ô
Chapter 2
63