Maintenance Operations To Be Performed By The User - Cattini Oleopneumatica YAK Manual Uso Y Mantenimiento

SCRAPPING AND DISPOSAL
- Lubricants must be disposed of in compliance with applicable pollution legislation.
- The user must follow applicable legislation when scrapping the jack and its component parts.
USE
Follow the safety rules given in this manual to the letter.
WARNING! Before operating the jack, open the cock
Position the jack beneath the support point indicated in the vehicle manufacturer manual by sliding the jack along the beam
and the beam along the pit walls.
MANUAL CONTROL
▪ Rapid Raising: pressing the green button (A) brings the pistons into contact with the load to be lifted.
(DWG. 4)
▪ Raising: Check that the manual valve (B) is closed. Repeatedly operate the lever of the manual pump (C)
to lift the load with the jack
▪ Lowering: Slowly open the manual valve (B) to lower the pistons in a controlled fashion.
The manufacturer shall not be held liable for any damage to the lifted vehicle or other property, or for injuries,
caused by incorrect use of the jack.
After lifting the load, it is absolutely essential to rest it on appropriate support stands before performing any work
beneath it. REMEMBER! THE JACK IS A LIFTING DEVICE AND NOT A SUPPORTING DEVICE!
- The operator`s employer shall provide the necessary training and supply the necessary information on pumping
and movement forces.
- Before working with the jack, it is advisable to perform a few operations with no load in order to acquire the sensitivity
necessary to work safely with the jack.
- When the jack is not in use, always keep the pistons lowered
IMPROPER USE
The air-hydraulic jack has been designed and manufactured to lift transport vehicles only. Any other use of the jack which
does not conform to the safety standards outlined in this manual, for instance lifting and/or moving persons, is considered
absolutely improper.
WARRANTY
This jack is covered by a 12-month warranty starting from the date the jack leaves our factory unless the warranty has
been activated on-line; this covers all manufacturing defects but not transport expenses, defects caused by improper use
or damage suffered during transport. For more details please see the warranty card attached to this manual.

MAINTENANCE OPERATIONS TO BE PERFORMED BY THE USER

- To ensure a long life for your jack, it is advisable to clean the outside of the pistons every two weeks.
- Check the level of fluid in the tank at least twice a year.
6
POS. 19 A00382 POS. 19 A00382
EN