Patek Philippe 240 Q Manual De Instrucciones página 14

14
4. setting
If the day-of-week display at 9 o'clock does not
correspond with the date, repeatedly press the
push piece at 9 o'clock until the correct day
appears on the subsidiary dial at 9 o'clock.
5. setting
Each time you press the push piece at 6 o'clock
or at 5 o'clock (Nautilus model), the moon-
phase display will advance by one day.
Advance the lunar disk until the full moon
appears in the aperture. Consult the "Full moon
and leap year calendar" brochure, an almanac or
visit www.patek.com and count the number of
days that have elapsed since the last full moon
(relative to the current date).
To set the correct moon phase, press the push
piece as many times as days have elapsed since
the last full moon.
6. setting the time
Gently pull the crown out to position 2, and
move the hands to set the correct time. If you
move the hands forward beyond midnight, all
calendar displays will advance by one day. Press
the crown home again.
If your watch is equipped with a screw-down
crown (Nautilus model), unscrew the crown
completely before you set the time. Then pull
the crown out to position 2 and proceed with
the setting. Finally, push the crown all the way
in and screw it tight again.
/
correcting the day of the week
/
correcting the moon phase