Mi-T-M Corporation CHV Serie Manual Del Operador página 21

SYMPTOM
Low or fluctuating pressure.
Oil appears milky or foamy.
Oil leaking from unit.
Water flows from the nozzle when the
trigger gun is turned off.
Operator's Manual
troublesHooting
PROBABLE CAUSE
Kink in high pressure discharge hose.
Water inlet screen obstructed.
Pump sucking air. (Prime lost)
Obstructed or worn spray nozzle.
Damaged or obstructed valve assy.
Bypass valve not operating correctly.
One or more diaphragms have
ruptured.
DO NOT USE!!!!!
Gun is malfunctioning.
REMEDY
Replace kinked pressure hose.
Remove screen, clean or replace.
Tighten all water intake
connections. Eliminate leaks in
intake line.
Remove and clean, or replace.
Remove, inspect, clean or
replace.
Repair or replace.
Replace diaphragms
Contact Customer Service.
Repair or replace.
2