Installing your car stereo
Oldsmobile
Achieva 1992-1995
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the four screws from the top edge of the dash trim bezel.
3 Remove the two screws from the bottom edge of the bezel.
4 Unsnap the A/C ducts, disconnect the light switch, then remove the bezel.
5 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
6 Go to "Completing the installation" on page 76.
2
S10 shown
as example
55