Dynex DX-G1113 Guia Del Usuario página 61

Installing your car stereo
Pontiac
6000 1982-1991
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Open the glove box, then remove the one screw from the side of the radio trim bezel.
3 Carefully remove the bezel from the dash, then remove the dummy plate from the
bezel.
4 Cut and remove all mounting tabs on bracket 5 except the A tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to "Completing the installation" on page 76.
A
A
61