Roadstar HRA-590D+ Manual De Instrucciones página 4

1 English
LOCATION OF CONTROLS
1. POWER ON - OFF
2. MODE
3. INFO/MENU
4. PRESET
5. CHANNEL +/-
6. SELECT
7. VOLUME+/-
8. EARPHONE JACK
9. DC IN
10. BATTERY COMPARTMENT
11. AUX IN JACK
PRECAUTION
• INSTRUCTIONS - All the safety and operating instructions should be read before
the radio is operated. The manual should be retained for future reference.
•
HEED WARNINGS - All warnings on the appliance and in the operating instruc-
tions should be adhered to.
• WATER AND MOISTURE - The appliance should not be used near liquids or in
rooms with a high level of humidity.
•
VENTILATION - The appliance should be situated so that its location or position
does not interfere with its proper ventilation.
• HEAT - The appliance should be situated away from heat sources such as radia-
tors, stoves or other appliances that produce heat.
• POWER SOURCE - The radio should be connected to power supply only of the
type described in the operating instructions or as marked on the appliance.
•
POWER CORD PROTECTION - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon/against
them.
•
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
• DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
- The power supply cord or plug has been damaged;
- Objects have fallen into or liquids has been spilled into the radio;
- The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.
• SERVICING - The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and
remove all the batteries, then turn the power back on after a few seconds.