Troubleshooting - TRENDnet TEG-448WS Guía De Instalación Rápida

Troubleshooting

Q1: After connecting the TEG-448WS to a power outlet, the LEDs do not turn on.
A1: Check the connection of the power cord to the TEG-448WS and the power
outlet. Also check that the power outlet is receiving power.
Q2: After installing the Web-Management Utility, I clicked Discovery and the Utility
is unable to discover the TEG-448WS. What should I do?
A2: Make sure that the TEG-448WS is powered on and that all connections are
secure. Also check that your computer's IP address is on the same network
segment as the TEG-448WS. The default IP address of the TEG-448WS is
http://192.168.0.1 and the default password is "admin".
Q3: When I access the TEG-448WS using a web browser, I get a screen that tells
me "only one user can login". What should I do?
A3: Another computer is configuring the TEG-448WS. Please wait until the user
logs off. If the other user has already logged off and you still get the same screen,
then disconnect the power cord from the TEG-448WS, wait for 5 seconds,
reconnect the power cord to the TEG-448WS, allow 5 seconds for the Switch to
power on, and then attempt to access the web configuration page to login.
Q4: I forgot the administration password. How do I reset my TEG-448WS?
A4: Press on the reset button using a pen or paperclip for 10 seconds. The
default password is admin.
If you still encounter problems or have any questions regarding the TEG-448WS, please
refer to the User's Guide included on the Utility CD-ROM or contact TRENDnet's
Technical Support Department.
6