After The Calc-Clean Process - Philips Azur Cordless HI575 Manual Del Usuario

ENGLISH
14
1 Set the steam control to position 0.
2 Open the cap of the filling opening and fill the water tank up to
the maximum level. Then close the cap again.
Do not pour vinegar or other descaling agents into the water tank.
3 Put the iron on its stand.
4 Set the temperature dial to MAX.
5 Put the mains plug in the wall socket.
C
Set the mode switch to position ∫ (cordless).
6
C
7 Wait until the temperature light goes out and then remove the
iron from the stand.
C
8 Hold the iron over the sink, press and hold the Calc-Clean
button and gently shake the iron to and fro.
Steam and boiling water will come out of the soleplate. Scale (if any)
will be flushed out.
9 Release the Calc-Clean button after one minute or when the
water tank is empty.
10 Repeat the Calc-Clean process if the water coming out of the
iron still contains a lot of scale particles.

After the Calc-Clean process

1 Put the iron back on the stand to let the soleplate dry.
2 Unplug the iron when the light has gone out.
3 Move the iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.