Eldom miko SI1000 Instrucciones De Uso página 12

NOTE. Do not pour milk above the maximum level for the given function.
After use, wait for about 2 minutes for the thermostat to reset. This time may be shortened
when cold water is poured into the tank. Dry clean the appliance before its use.
CLEANING AND MAINTENANCE
• Clean the appliance immediately after use and cooling down.
• Before cleaning, turn off the appliance with the button (9, 10), disconnect from the
power supply and wait to cool down.
• Never immerse the base (8) in water, and do not rinse under running water.
• The external surfaces may be cleaned with a damp cloth.
• Wash the elements (1), (2), (3), (4), (5), (6+7) in warm water with addition of washdish,
use a soft sponge and rinse under running water.
• Do not use abrasive agents, cleaning powders, acetone, alcohol, etc.
• The elements (1), (3), (4), (6+7) may be washed in a dishwasher, placed on the upper
shelf. Make sure that they are placed away from the heating element. The maximum
temperature is 50°C.
ENVIRONMENT PROTECTION
• the device is made of materials which can be reused or recycled.
• the device should be handled to a special point which deals with collecting and recycling
of electric and electronic equipment.
GUARANTEE
• the device is designed to be used in households.
• not for professional use.
• the control lamp is not subject to guarantee.
• the guarantee expires when device is used improperly.
•
12 EN