jbc CV-E Manual Del Usuario página 5

Adjustable stand
Adjust the tool stand to suit
your work position.
Tip Cleaner
Select the option to suit your needs and improve the thermal transfer of the tip.
Splashguard
Ref. 0017576
When using the brass wool, it prevents
splashing of solder particles
.
Brass Wool
Ref. CL6210
Very effective
cleaning method.
Leaves a small layer
of solder on the tip
preventing oxidation
between cleaning
and rewetting.
Cable collector
Place the cable on the collector so that the working area is free
of cable.
Antisplash Membrane
Ref. 0017574
Prevents splashing and keeps the work area
clean.
w w w.jbctools.com
(Ref. CC3702)
If the tip is very dirty,
JBC recommends first
cleaning it with the wiper
to remove excess solder.
Wiper
A temperature resistant receptacle
for removing excess solder by gently
tapping or wiping.
5