System Configuration Password 10009 - DAB EEG0,75T3 S Instrucciones Para La Instalación Y El Mantenimiento

11.3 SYSTEM CONFIGURATION USER PASSWORD: 10009.
[100] Language
Menu language.
[109] Load loss compensation
Automatic increase of the Reference
Pressure, for switching on pumps in
cascade mode.
[111] Reference pressure 1
Pressure set-point in bar, to be kept
constant.
[111'] Reference pressure 2
Pressure Setpoint 2, to be kept constant,
at the digital input
parameter 300.
112] KP correction
Instantaneous correction of error of the
system instantaneous pressure and the
reference pressure.
IF MOTORS OVER 24A DEFAULT 10
[114] Periodic minimum
reduction
Set percentage of minimum speed below
which stopping of the pump supplied by
the inverter is enabled.
[115] Minimum speed
Set percentage of inverter speed to
enable stopping of
cascade mode.
(Parameter updated according to the
modification of parameters 110 and
111.)
[120] Minimum H2O Pressure
Pressure value to be set according to the
pressure of the column of water on
delivery.
Access page to sub-menus by selecting:
100: System settings
300: input/Output
To move from one sub-menu to the other use the arrow keys.
To select the sub-menu (100/300) the respective symbol must be next to the key
which must be pressed to confirm.
Sub-menu 100 – System Settings
English
French
German
Spanish
0.0 - 1.0 bar
0.0 – 10 m
0.0 - 25.0 bar
0.0 – 100.0 m
0.0 - 25.0 bar
M.15-16 KL4,
0.0 – 100.0 m
000 - 250
speed
0 - 100 %
0 - 100 %
the pumps in
0.0 – 5.0 bar
ENGLISH
Field Default
Italian
Italian
0.0 bar
0.0 m
6.0 bar
60.0 m
0.0 bar
0.0 m
50
(booster)
30
(circ.)
(010)
90
60
0.5 bar
90
BOOSTER
See parameter 101
CIRCULATORS
See parameter 101
NOT PRESENT
NOT PRESENT
NOT PRESENT