Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PRE-OPERATING INSTRUCTIONS
1.
Carefully remove your heater from box. (Please SAVE the Box for off season
storage).
2.
Make sure the heater is switched OFF before plugging the heater into the
outlet. Connect to properly grounded outlets only. Note: The power cord has a
polarized plug (with one blade wider than the other) that will only fit in a
polarized outlet one way. If it does not insert easily try reversing the plug. If it
still does not fit contact your electrician to replace your outlet. DO NOT defeat
the safety purpose of the polarized plug.
3.
Place heater only on a firm level surface, free from obstructions and at least 3
ft. away from any wall or other objects such as curtains, plants, etc.
4.
Avoid overloading your circuit by not using other high wattage appliances in the
same outlet.
5.
Always attach the wheels to the BOTTOM of the heater before operation.
Never operate the heater without wheels installed. (see page 3)
HOW TO USE YOUR HEATER
1.
Completely uncoil the cord and plug heater directly into a 110~120 Volt
grounded AC wall outlet. Be sure the plug fits tightly. A loose fit will cause
overheating and damage the plug. Plug and cord may feel warm during normal
usage. Never use with an extension cord. (Page 2 # 9)
2.
Choose your Power Setting:
"0" – Off
"I" – 600 watts
"II" – 900 watts
"III" – 1500 watts
3. Thermostat: Turn to highest setting (clockwise) until desired room
temperature is reached. Please note this heater has a "warm up"
period. In order to maintain a more even room temperature, the oil in
you heater needs to warm before it can heat the room.
Slowly rotate the knob counter-clockwise until the heater cycles OFF.
At this SET POINT the heater will cycle ON and OFF to maintain this
comfort level.
CAUTION
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause FIRE, ELECTRIC
SHOCK or injury to persons
4
Publicidad
Tabla de contenido
