Opening The Chassis; Operating The Parking Brake; Operating The Front Swivel Wheels; Adjusting The Handle Height - Kiddy Evostar 1 Manual De Instrucciones

3.3 Opening the chassis

Ensure the chassis is stood upright. Push the travel locks down on the
side ( g. 3, no. 1) and bottom ( g. 3, no. 2) of the chassis.
Tip: If the locks are sti pull the chassis together to allow release.
Allow the front of the chassis to move forwards. You may have to pull
forward gently to assist this ( g. 4).
Lift the handle upwards until you hear the lock engage with a click
( g. 5).
WARNING
Ensure the locking devices are engaged before use.

3.4 Operating the parking brake

Press down on the pedal to engage the parking brake. Press down
and release to disengage the parking brake ( g. 6).
WARNING
Never leave the vehicle without rst fully engaging
the parking brake.

3.5 Operating the front swivel wheels

Press the button until it clicks to switch between xed or swivel wheel
travel ( g. 7).

3.6 Adjusting the handle height

Rotate the central section of the handle forward ( g. 8, no. 1) and slide
into the desired position ( g. 8, no. 2). Note:
positions.
EN
e handle has 5 height
9