Mounting Diagram - Chauvet DJ Beamer 8 Guía De Referencia Rápida

Beamer 8 QRG
Mounting
Mounting
Diagram
Before mounting this product, read the
can be surface mounted, but if you choose to mount overhead using the
mounting hole; do this with a screw, nut and bolt, or a hanging clamp. When
rigging, consider IR function.
Safety Cable
· When aiming the products, you may use the bracket adjustment
knob(s) on the bracket. Loosen the knob(s), adjust to the desired
angle, and then tighten the knob(s) by turning clockwise. Do not use
tools for this step, as it may cause damage.
· Each LED beam head is mounted on a multidirectional pivot, and
can be manually adjusted to most positions.
Safety
6
Notes. The Beamer 8 products
Mounting
Clamp
Mounting
Bracket
EN