Swing-N-Slide Alpine PROJECT 611 Manual De Instrucciones página 130

PROJECT 613 • PROJECT 614
614 614
613 613
Fig. 13
(4)
2-1/2'' screws/nails
(Underneath)
2-1/2'' or 10D
screw/nail
Fig. 13b
BACK OPENING OPTION 2
(2)
2-1/2'' screws/nails
(Per joint)
(3)
2-1/2'' screws/nails
(Both Sides)
Fig. 13a
3-3/8''
23-1/4''
5' Climbing Rock Wall will require
min. 12 Climbing Rocks
Climbing Wall.
(1) 2x4x96 ------ (1) 2x4x60 (1) 2x4x23-1/4
(1) 2x4x96 ------ (1) 2x4x60
(1) 2x4x96 ------ (1) 2x4x55-1/4
(3) 5/4x6x120 - (4) 5/4x6x30
1. Assemble and install Climbing Wall Frame and body
as shown in (Fig. 13), (Fig. 13a).
2. Attach (9) 5/4'' x6'' boards to (2) 2'' x 4'' boards
and install on unit as shown in (Fig. 13b).
Note: Make sure the 2'' x 4'' supports do not
interfere with the mounting of the climbing
rocks.
58 58
(2)
2-1/2'' screws/nails
(Per joint)
NOTE: