Publicidad
Idiomas disponibles
Idiomas disponibles
Application According to Purpose
This product is a lighting effect which creates special light effects with one lamp. To generate these
effects,the product must be connected to mains and a DMX-512 compatible controller.
This product is designed for AC110~240V/50~60Hz operation and exclusively for indoor use.
If used for any purpose other than described in these operating instructions,the device may suffer damage
and the warranty expires.Also,any other use is linked with risks such as short circuits,fire,electrical
shock,etc.
The manufacturer's serial number must never be removed as otherwise the warranty expires.
Notes on safety
1. Before Operation
Prior to the initial operation of this product,please do the followings
-Read these operating instructions with great care;
-Study and observe all instructions carefully;
-Ensure that everybody and anybody involved in the installation,operation,transport and
product is suitably qualified;
-Verify whether any visible damage was caused during transport.lf the power cord.housing or the light are
damaged,do not operate the device;contact your specialized dealer immediately.
2. Supply Voltage,Mains Cord and Connection to Mains
The handling of supply voltage,mains cords and connections to mains calls for particular care considering
the risk from a life-threatening electric shock,the risk of fire and the risk of short circuits please observe the
following notes in particular:
Products operating on supply voltage should be kept out of the reach of children.Therefore ensure the
permanent supervision if children are in the immediate vicinity of the product!
For commercial facilities the regulations on the prevention of accidents of the respective trade association
must be observed.The operation of this equipment at schools,training facilities,and hobbyorself-help
workshops must be supervised responsibly by trained personnel.
Check the product regularly for any damage to the mains cord! Should you discover any damage to the
malns cord, do not operate or disconnect this product! Secure the product against accidental operation and
contact your specialized de-alert.
Always separate the product from mains by holding the mains plug by the handling surface .Never
disconnect by holding the line cord ! Be sure to connect the product exclusively to an adequate supply.
Always insure during installation, operation, transport and when storing the product that the mains cord is
not exposed to possible mechanical damage, or damage caused by humidity,fluids,heat or cold!
The product must only be connected to a proper outlet of the public supply grid .Connect the mains cord to
suitable outlets only ! Use extensions cords in compliance with specifications only! Do not allow the mains
cord to come into contact with other cords!
MINIBEAM XTREME
ATTENTION：
DANGER OF LIFE！ RISKOF FIRE！
RISK OF SHORT CIRCUIT！
User Manual/Manual de uso
storage of this
P 2
EN
Publicidad
