Installer Setting -How To Enter Installer Setting Mode - Friedrich DWC1 Manual De Instalación Y Operaciones

Installation instruction

Installer Setting -How to enter installer setting mode

CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user injury or
property damage. This must be set by an certificated installer, and any installation or change that is
carried out by a non-certificated person should be responsible for the results. In this case, free service
cannot be provided.
• Some categories of the menu may not be displayed according to the function of the
product, or the menu name may be different.
8 DWC1 Programmable Thermostat
If pressing
1
it enters into remote controller setter
setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
When you enter the setting mode
2
initially, Function code is displayed on
the bottom of the LCD screen.
Function Code
button long for 3 seconds,
Value